Z
zerostack-rf/zerostack-mcp
更新 2026-11-18
在 GitHub 查看 ↗直链 · 无中转页
我们没有从该仓库取到可核对的安装命令,也没有公开的远端端点。这两样都没有时,我们不出配置——编一条出来比不给更糟。 各客户端的接法 →
- ★ 数取值
- 0 ★ · zerostack-rf/zerostack-mcp · 取自 GitHub 搜索 API · (2026-11-19 20:00:48 核对)
- 来源明细
- 收录自 punkpeye/awesome-mcp-servers 榜单(我们从中收集的条目之一) · 条目类型:MCP 服务
- 收录与活跃
- 收录于 2026-11-18 · 最近见到 2026-11-20 · 共见到 3 次 · 被 3 个来源列出
- 评分构成
- 综合分 300 · 3 个来源 · mcp
常见问题(答案都来自我们的记录)
它适合谁 / 用来做什么?
我们把它归在这些标签下: MCP 服务。标签来自条目自身,不是我们强加的分类。
谁维护它、还在更新吗?
仓库
zerostack-rf/zerostack-mcp;我们收录于 2026-11-18;最近见到 2026-11-20。这里没有"官方认证"或"质量评级"——我们只记录来源与时间。README 原文(英文,未翻译) · 在 GitHub 读完整 README →
# ZeroStack RF Diagnostics & Benchmark MCP Server (zerostack-mcp)
以下摘录自该仓库的 README(片段)
> Official ZeroStack Overview & Downloads: https://smlight.tech/software/zerostack
> Interactive Web Log Analyzer: https://smlight-tech.github.io/zerostack/
> Engineering Whitepaper & Benchmarks: WHITEPAPER.md (Part 1 PDF)
> Target Firmware: ZeroStack Release Zero
zerostack-mcp is an open-source Model Context Protocol (MCP) server that gives AI coding assistants and home-automation troubleshooting agents (Claude Desktop, Cursor, Windsurf, Cline, OpenAI Agents, Home Assistant AI agents) deterministic tools to:
1. Diagnose Zigbee2MQTT (z2m), Home Assistant ZHA (zigpy-znp, bellows), and OpenThread RCP logs (analyze_zigbee_thread_log), including Trust Center Z3_TCLK_EXCHANGE_TIMEOUT_LEAVE (BDB_TC_LINK_KEY_EXCHANGE / APS_UpdateDevice / TransportKey) loops, Many-to-One Concentrator routing, and idempotent cold-boot NVRAM backup & restore health.
2. Decode hardware radio/UART status registers (decode_silicon_register) for TI SimpleLink F2 (CC2652P, CC2652P7, CC1352P7, CC2674P10) and Silicon Labs EFR32 (EFR32MG21, EFR32MG24).
3. Evaluate Zigbee/Thread mesh coordinator capacity and hardware table limits (check_coordinator_capacity).
4. Query verified hardware validation benchmarks (DWT->CYCCNT @ 48.0 MHz) (get_zerostack_benchmarks) comparing ZeroStack Release Zero against legacy TI Z-Stack (ZNP 3.x) across SMLIGHT TI SimpleLink F2 coordinators.
## Quick Start
### Run with uvx (No Installation Required)
json
"mcpServers": {
"zerostack-rf": {
"command": "uvx",
"args": ["zerostack-mcp"]
### Local Development Installation
bash
git clone https://github.com/zerostack-rf/zerostack-mcp.git
cd zerostack-rf-mcp
uv sync
uv run pytest
uv run zerostack-mcp
## Supported Hardware — Release Zero
ZeroStack Release Zero supports the TI SimpleLink F2 family across SMLIGHT coordinators (Zigbee 3.0 / PRO R23 Coordinator & Router firmware with DMA-driven UART transport, incl. U variants):
| Radio SoC | CPU Core | Flash / SRAM | Supported SMLIGHT Models (incl. U variants) | Capacity & Scaling |
| TI CC2652P | ARM Cortex-M4F @ 48 MHz + Cortex-M0 CPE | 352 KB Flash / 88 KB SRAM | SLZB-06, SLZB-MR2 | 200-node table capacity, high-density source routes, indirect queue quota isolation |
| TI CC2652P7 (CC1352P7) | ARM Cortex-M4F @ 48 MHz + Cortex-M0 CPE | 704 KB Flash / 144 KB SRAM | SLZB-06P7, SLZB-07P7, SLZB-MR1 | 300-node table & TCLK capacity, high-density source routes, indirect queue isolation |
| TI CC2674P10 | ARM Cortex-M33 @ 48 MHz + Cortex-M0 CPE | 1024 KB Flash / 256 KB SRAM | SLZB-06P10, SLZB-07P10, SLZB-MR3, SLZB-MR4, SLZB-MRW10, SLZB-Ultima | Max-scale node & TCLK capacity, expanded concentrator source routing & indirect buffer pools |
> Note on Silicon Labs EFR32 (EFR32MG21 / EFR32MG24): zerostack-mcp includes diagnostic rules (0x72, 0xa1, ASH_NCP_FATAL_ERROR) and EUSART0_IF register decoding for Silicon Labs EmberZNet / EZSP coordinators (SLZB-06M, SLZB-06Mg24, SkyConnect/ZBT-1). ZeroStack Release Zero ships on SMLIGHT TI SimpleLink F2 coordinators; Silicon Labs EFR32 support is in active development.
## Verified Hardware Validation Benchmarks (TI CC1352P7 @ 48.0 MHz, DWT->CYCCNT)
### Part 1: Deterministic Execution Latency (1 µs = 48 cycles)
> Interactive Web Log Analyzer: https://smlight-tech.github.io/zerostack/
> Engineering Whitepaper & Benchmarks: WHITEPAPER.md (Part 1 PDF)
> Target Firmware: ZeroStack Release Zero
zerostack-mcp is an open-source Model Context Protocol (MCP) server that gives AI coding assistants and home-automation troubleshooting agents (Claude Desktop, Cursor, Windsurf, Cline, OpenAI Agents, Home Assistant AI agents) deterministic tools to:
1. Diagnose Zigbee2MQTT (z2m), Home Assistant ZHA (zigpy-znp, bellows), and OpenThread RCP logs (analyze_zigbee_thread_log), including Trust Center Z3_TCLK_EXCHANGE_TIMEOUT_LEAVE (BDB_TC_LINK_KEY_EXCHANGE / APS_UpdateDevice / TransportKey) loops, Many-to-One Concentrator routing, and idempotent cold-boot NVRAM backup & restore health.
2. Decode hardware radio/UART status registers (decode_silicon_register) for TI SimpleLink F2 (CC2652P, CC2652P7, CC1352P7, CC2674P10) and Silicon Labs EFR32 (EFR32MG21, EFR32MG24).
3. Evaluate Zigbee/Thread mesh coordinator capacity and hardware table limits (check_coordinator_capacity).
4. Query verified hardware validation benchmarks (DWT->CYCCNT @ 48.0 MHz) (get_zerostack_benchmarks) comparing ZeroStack Release Zero against legacy TI Z-Stack (ZNP 3.x) across SMLIGHT TI SimpleLink F2 coordinators.
## Quick Start
### Run with uvx (No Installation Required)
json
"mcpServers": {
"zerostack-rf": {
"command": "uvx",
"args": ["zerostack-mcp"]
### Local Development Installation
bash
git clone https://github.com/zerostack-rf/zerostack-mcp.git
cd zerostack-rf-mcp
uv sync
uv run pytest
uv run zerostack-mcp
## Supported Hardware — Release Zero
ZeroStack Release Zero supports the TI SimpleLink F2 family across SMLIGHT coordinators (Zigbee 3.0 / PRO R23 Coordinator & Router firmware with DMA-driven UART transport, incl. U variants):
| Radio SoC | CPU Core | Flash / SRAM | Supported SMLIGHT Models (incl. U variants) | Capacity & Scaling |
| TI CC2652P | ARM Cortex-M4F @ 48 MHz + Cortex-M0 CPE | 352 KB Flash / 88 KB SRAM | SLZB-06, SLZB-MR2 | 200-node table capacity, high-density source routes, indirect queue quota isolation |
| TI CC2652P7 (CC1352P7) | ARM Cortex-M4F @ 48 MHz + Cortex-M0 CPE | 704 KB Flash / 144 KB SRAM | SLZB-06P7, SLZB-07P7, SLZB-MR1 | 300-node table & TCLK capacity, high-density source routes, indirect queue isolation |
| TI CC2674P10 | ARM Cortex-M33 @ 48 MHz + Cortex-M0 CPE | 1024 KB Flash / 256 KB SRAM | SLZB-06P10, SLZB-07P10, SLZB-MR3, SLZB-MR4, SLZB-MRW10, SLZB-Ultima | Max-scale node & TCLK capacity, expanded concentrator source routing & indirect buffer pools |
> Note on Silicon Labs EFR32 (EFR32MG21 / EFR32MG24): zerostack-mcp includes diagnostic rules (0x72, 0xa1, ASH_NCP_FATAL_ERROR) and EUSART0_IF register decoding for Silicon Labs EmberZNet / EZSP coordinators (SLZB-06M, SLZB-06Mg24, SkyConnect/ZBT-1). ZeroStack Release Zero ships on SMLIGHT TI SimpleLink F2 coordinators; Silicon Labs EFR32 support is in active development.
## Verified Hardware Validation Benchmarks (TI CC1352P7 @ 48.0 MHz, DWT->CYCCNT)
### Part 1: Deterministic Execution Latency (1 µs = 48 cycles)
收录徽章(可选)
想把收录标记放进 README 就复制这行,可选,不影响收录。
[](https://anclum.com/zh/s/zerostack-rf-zerostack-mcp/)
- 来源
- awesome · https://github.com/zerostack-rf/zerostack-mcp
- 按领域浏览
- MCP 服务
- 收录来源
- 3 个独立来源
- 收录于
- 今天
更多 MCP 服务器
所属领域与标签
每个标签都能点进去看同类的全部条目。数字是当前库里的真实条数。