Y
ysskrishna/claude-code-subagents-for-cursor
Cursor skill that runs your custom subagents through Claude Code, so each one runs on the model in its own…
在 GitHub 查看 ↗链接已于 2026-11-12 核查 · HTTP 200 · 打开的是厂商自己的官网
安装与配置
客户端配置（取自该仓库的安装命令）
{
"mcpServers": {
"ysskrishna-claude-code-subagents-for-cur": {
"command": "npx",
"args": ["skills"]
}
}
}解析自我们于 2026-11-11 抓取的该仓库 README；我们未执行过。
command/args 来自仓库写明的安装命令；不确定时请以该项目 README 为准。
VS Code（.vscode/mcp.json —— 键名是 servers）
{
"servers": {
"ysskrishna-claude-code-subagents-for-cur": {
"command": "npx",
"args": ["skills"]
}
}
}VS Code 顶层键是 <code>servers</code>，其余与上面那份相同。
Claude Code（命令行）
claude mcp add --transport stdio ysskrishna-claude-code-subagents-for-cur -- npx skills
Claude Code 不收 JSON 文件，用这条命令直接加。
配置项的键名以你的客户端为准：客户端与 CLI
- ★ 数取值
- 0 ★ · ysskrishna/claude-code-subagents-for-cursor · 取自 GitHub 搜索 API · （2026-11-13 20:00:50 核对）
- 来源明细
- 从该仓库的 GitHub 页面直接读取 · 条目类型：开源项目
- 收录与活跃
- 收录于 2026-11-12 · 最近见到 2026-11-14 · 共见到 3 次 · 被 2 个来源列出
- 评分构成
- 综合分 203 · 2 个来源 · repo
- 安装
npx skills
常见问题（答案都来自我们的记录）
怎么安装？
该仓库给出的安装命令是
npx skills。我们的记录里它是仓库自己提供的；不保证在你的客户端上直接可用。它适合谁 / 用来做什么？
我们把它归在这些标签下: Agent 技能。标签来自条目自身，不是我们强加的分类。
谁维护它、还在更新吗？
仓库
ysskrishna/claude-code-subagents-for-cursor；我们收录于 2026-11-12；最近见到 2026-11-14。这里没有"官方认证"或"质量评级"——我们只记录来源与时间。# Claude Code Subagents for Cursor
以下摘录自该仓库的 README（片段） · 在 GitHub 读完整 README →
A Cursor skill that runs your custom subagents through Claude Code, so each one runs on the model: written in its own agent file instead of the parent chat's model. Invoke it with /use-claude-code-subagents.
## Overview
In Cursor, custom subagents (.cursor/agents/.md, .claude/agents/.md, .codex/agents/.md) declare a model: in their frontmatter, but the Task tool runs them on the parent chat's model in two cases:
a personal Anthropic API key (BYOK) is on (confirmed by Cursor staff), or
the agent's model is not enabled in Cursor.
An agent you set up for Haiku then bills at Opus rates. Claude Code, run headlessly from Cursor's Shell tool, does honor the model: in agent files. This skill routes custom subagents through claude -p for the rest of the chat, and every run reports the model it actually ran on.
You need: Cursor desktop running locally (Cloud Agents have no claude CLI), Claude Code installed and signed in (setup guide), and a POSIX shell (macOS, Linux). Runs bill your Claude Code account. The skill checks the Claude Code version for you.
## Installation
Pick one route. All of them install the same skill.
Cursor plugin (recommended)
In Cursor, open Customize, Plugins, Add, From GitHub Repository and enter:
text
github.com/ysskrishna/claude-code-subagents-for-cursor
Choose user scope to get the skill in every project, or project scope to commit it for a team. More in docs/install/cursor-setup.md.
skills.sh (npx skills)
bash
npx skills add ysskrishna/claude-code-subagents-for-cursor -a cursor -g
Installs to ~/.agents/skills/, which Cursor loads. Drop -g to install into the current project. Update with npx skills update. Remove with npx skills remove use-claude-code-subagents. More in docs/install/skills-sh-setup.md.
GitHub CLI (gh skill)
bash
gh skill install ysskrishna/claude-code-subagents-for-cursor --all --agent cursor --scope user
Installs to ~/.cursor/skills/. Without --agent cursor, gh installs for GitHub Copilot. Update with gh skill update. More in docs/install/gh-cli-setup.md.
Manual
Copy the skills/use-claude-code-subagents folder, including references/, to ~/.cursor/skills/ (user) or /.cursor/skills/ (project). More in docs/install/manual-setup.md.
## Usage
text
/use-claude-code-subagents
The agent replies Subagent mode: claude code. From then on, each custom subagent you ask for runs through Claude Code on its own model, and the reply ends with a line like scout ran on claude-haiku-5-5. Say "use cursor subagents" to switch back to Cursor's Task tool.
More in docs/guides/usage.md: how the skill loads on its own, what to expect, and how to check it works. To try it on a ready-made project with two agents, see examples/subagents.
Run without approval prompts
Claude Code runs outside Cursor's sandbox, so pick a run mode that allows it in Cursor Settings, Agents, Approvals & Execution:
Auto-Review (with Sandbox): suggested. Commands outside the sandbox go through a safety check.
## Overview
In Cursor, custom subagents (.cursor/agents/.md, .claude/agents/.md, .codex/agents/.md) declare a model: in their frontmatter, but the Task tool runs them on the parent chat's model in two cases:
a personal Anthropic API key (BYOK) is on (confirmed by Cursor staff), or
the agent's model is not enabled in Cursor.
An agent you set up for Haiku then bills at Opus rates. Claude Code, run headlessly from Cursor's Shell tool, does honor the model: in agent files. This skill routes custom subagents through claude -p for the rest of the chat, and every run reports the model it actually ran on.
You need: Cursor desktop running locally (Cloud Agents have no claude CLI), Claude Code installed and signed in (setup guide), and a POSIX shell (macOS, Linux). Runs bill your Claude Code account. The skill checks the Claude Code version for you.
## Installation
Pick one route. All of them install the same skill.
Cursor plugin (recommended)
In Cursor, open Customize, Plugins, Add, From GitHub Repository and enter:
text
github.com/ysskrishna/claude-code-subagents-for-cursor
Choose user scope to get the skill in every project, or project scope to commit it for a team. More in docs/install/cursor-setup.md.
skills.sh (npx skills)
bash
npx skills add ysskrishna/claude-code-subagents-for-cursor -a cursor -g
Installs to ~/.agents/skills/, which Cursor loads. Drop -g to install into the current project. Update with npx skills update. Remove with npx skills remove use-claude-code-subagents. More in docs/install/skills-sh-setup.md.
GitHub CLI (gh skill)
bash
gh skill install ysskrishna/claude-code-subagents-for-cursor --all --agent cursor --scope user
Installs to ~/.cursor/skills/. Without --agent cursor, gh installs for GitHub Copilot. Update with gh skill update. More in docs/install/gh-cli-setup.md.
Manual
Copy the skills/use-claude-code-subagents folder, including references/, to ~/.cursor/skills/ (user) or /.cursor/skills/ (project). More in docs/install/manual-setup.md.
## Usage
text
/use-claude-code-subagents
The agent replies Subagent mode: claude code. From then on, each custom subagent you ask for runs through Claude Code on its own model, and the reply ends with a line like scout ran on claude-haiku-5-5. Say "use cursor subagents" to switch back to Cursor's Task tool.
More in docs/guides/usage.md: how the skill loads on its own, what to expect, and how to check it works. To try it on a ready-made project with two agents, see examples/subagents.
Run without approval prompts
Claude Code runs outside Cursor's sandbox, so pick a run mode that allows it in Cursor Settings, Agents, Approvals & Execution:
Auto-Review (with Sandbox): suggested. Commands outside the sandbox go through a safety check.
收录徽章（可选）
想把收录标记放进 README 就复制这行，可选，不影响收录。
[](https://anclum.com/zh/s/ysskrishna-claude-code-subagents-for-cursor/)
- 来源
- github · https://github.com/ysskrishna/claude-code-subagents-for-cursor
- 按领域浏览
- Agent 技能
- 收录来源
- 2 个独立来源
- 收录于
- 今天
同类推荐
所属领域与标签
每个标签都能点进去看同类的全部条目。数字是当前库里的真实条数。