S
synopsys0/postfader-fl-studio-mcp
Let Claude, Codex, Cursor, or any MCP client work inside the FL Studio project you have open.
★ 16·更新 2026-10-26
在 GitHub 查看 ↗直链 · 无中转页
我们没有可直接复制的安装命令,也没有公开的远端端点,所以不出配置。上面那条命令仅供参考,不是我们能担保的可复制命令——编一条出来比不给更糟。 各客户端的接法 →
- ★ 数取值
- 16 ★ · synopsys0/postfader-fl-studio-mcp · 取自 GitHub 搜索 API · (2026-11-19 20:00:48 核对)
- 来源明细
- 收录自 punkpeye/awesome-mcp-servers 榜单(我们从中收集的条目之一) · 条目类型:MCP 服务
- 收录与活跃
- 收录于 2026-11-18 · 最近见到 2026-11-20 · 共见到 3 次 · 被 3 个来源列出
- 评分构成
- 综合分 300 · 16 ★ · 3 个来源 · mcp
常见问题(答案都来自我们的记录)
它适合谁 / 用来做什么?
我们把它归在这些标签下: MCP 服务。标签来自条目自身,不是我们强加的分类。
谁维护它、还在更新吗?
仓库
synopsys0/postfader-fl-studio-mcp;我们收录于 2026-11-18;最近见到 2026-11-20。这里没有"官方认证"或"质量评级"——我们只记录来源与时间。README 原文(英文,未翻译) · 在 GitHub 读完整 README →
# PostFader: FL Studio MCP Server
以下摘录自该仓库的 README(片段)
Let Claude, Codex, Cursor, or any MCP client work inside the FL Studio project you have open.
Quick start · What it does · Why PostFader · Docs · FAQ
Free and open source. Unofficial: not made by or affiliated with Image-Line.
PostFader is an FL Studio MCP server. It connects your AI assistant to the
project you already have open, so the AI can read your mixer, channels,
plug-ins and patterns, check your exported mix, write MIDI, and make changes
for you. Every supported change is read back from FL Studio, so you see what
actually happened.
It runs on your computer. There is no PostFader account, cloud service, or
telemetry.
## What you can ask for
| | Ask your AI | What PostFader does |
| 🔎 Understand a project | "Which instruments aren't routed to the mixer?" | Reads routing, effects, channels, patterns, Playlist tracks, and plug-in parameters. |
| 🩺 Fix a mix | "What are the three biggest problems in this bounce?" | Measures loudness, peaks, tonal balance, stereo width, and vocal masking in the files you export, and compares them with a reference. |
| 🎛️ Change the session | "Pan the backing vocals wider and pull the reverb send down 3 dB." | Sets faders, pan, sends, routing, names, colors, tempo, transport, and any parameter a loaded plug-in exposes, then reads each one back. |
| 🎹 Write music | "Add an 8-bar D Dorian bassline under my chords." | Generates chords, melodies, basslines, and drums; writes them to the Piano Roll or exports MIDI files. |
| 🎚️ Pick sounds | "Choose the sounds yourself from what's loaded." | Picks presets on the instruments in your project and confirms each selection. |
| 🧱 Run a whole task | "Turn this loop into a 16-bar draft, but keep my vocal." | Runs the job as a checked plan you can resume. Export a bounce and it can review the draft and plan one revision. |
Browse all 85 tools in the tool reference.
## Quick start
You need: FL Studio 2026 (26.1.3 or newer) on Windows or macOS,
Python 3.10 to 3.14, and a virtual MIDI
port: the built-in IAC Driver on macOS, or a free app such as loopMIDI
on Windows.
1. Run the installer. Download the Windows or macOS ZIP from the
latest release, extract it, and run the installer inside. It
installs PostFader, copies the bridge script into FL Studio, and asks which
MIDI port to use.
2. In FL Studio, open Options → MIDI settings. Enable your virtual port as
both input and output, set the input's controller type to
Universal Bridge, and give both the same port number.
3. Connect your AI client with the configuration the installer prints (see
Works with).
4. Ask a question first, like "Summarize my project." PostFader starts
read-only, so nothing changes until you ask for an edit.
Using Python directly? Run pip install postfader-fl-studio-mcp, then
postfader setup. The setup guide covers every option, and
postfader-doctor pinpoints anything that isn't connected.
## How it works
FL Studio only runs scripts from inside itself, so PostFader talks to a small
controller script, the Universal Bridge, over a virtual MIDI port. Audio
analysis works on files you export, because FL Studio doesn't expose its live
output to scripts.
## Why PostFader
Nothing changes until you ask. PostFader starts read-only. Edits need
Quick start · What it does · Why PostFader · Docs · FAQ
Free and open source. Unofficial: not made by or affiliated with Image-Line.
PostFader is an FL Studio MCP server. It connects your AI assistant to the
project you already have open, so the AI can read your mixer, channels,
plug-ins and patterns, check your exported mix, write MIDI, and make changes
for you. Every supported change is read back from FL Studio, so you see what
actually happened.
It runs on your computer. There is no PostFader account, cloud service, or
telemetry.
## What you can ask for
| | Ask your AI | What PostFader does |
| 🔎 Understand a project | "Which instruments aren't routed to the mixer?" | Reads routing, effects, channels, patterns, Playlist tracks, and plug-in parameters. |
| 🩺 Fix a mix | "What are the three biggest problems in this bounce?" | Measures loudness, peaks, tonal balance, stereo width, and vocal masking in the files you export, and compares them with a reference. |
| 🎛️ Change the session | "Pan the backing vocals wider and pull the reverb send down 3 dB." | Sets faders, pan, sends, routing, names, colors, tempo, transport, and any parameter a loaded plug-in exposes, then reads each one back. |
| 🎹 Write music | "Add an 8-bar D Dorian bassline under my chords." | Generates chords, melodies, basslines, and drums; writes them to the Piano Roll or exports MIDI files. |
| 🎚️ Pick sounds | "Choose the sounds yourself from what's loaded." | Picks presets on the instruments in your project and confirms each selection. |
| 🧱 Run a whole task | "Turn this loop into a 16-bar draft, but keep my vocal." | Runs the job as a checked plan you can resume. Export a bounce and it can review the draft and plan one revision. |
Browse all 85 tools in the tool reference.
## Quick start
You need: FL Studio 2026 (26.1.3 or newer) on Windows or macOS,
Python 3.10 to 3.14, and a virtual MIDI
port: the built-in IAC Driver on macOS, or a free app such as loopMIDI
on Windows.
1. Run the installer. Download the Windows or macOS ZIP from the
latest release, extract it, and run the installer inside. It
installs PostFader, copies the bridge script into FL Studio, and asks which
MIDI port to use.
2. In FL Studio, open Options → MIDI settings. Enable your virtual port as
both input and output, set the input's controller type to
Universal Bridge, and give both the same port number.
3. Connect your AI client with the configuration the installer prints (see
Works with).
4. Ask a question first, like "Summarize my project." PostFader starts
read-only, so nothing changes until you ask for an edit.
Using Python directly? Run pip install postfader-fl-studio-mcp, then
postfader setup. The setup guide covers every option, and
postfader-doctor pinpoints anything that isn't connected.
## How it works
FL Studio only runs scripts from inside itself, so PostFader talks to a small
controller script, the Universal Bridge, over a virtual MIDI port. Audio
analysis works on files you export, because FL Studio doesn't expose its live
output to scripts.
## Why PostFader
Nothing changes until you ask. PostFader starts read-only. Edits need
收录徽章(可选)
想把收录标记放进 README 就复制这行,可选,不影响收录。
[](https://anclum.com/zh/s/synopsys0-postfader-fl-studio-mcp/)
- 来源
- awesome · https://github.com/synopsys0/postfader-fl-studio-mcp
- 按领域浏览
- MCP 服务
- Traction
- 16 ★
- 收录来源
- 3 个独立来源
- 收录于
- 今天
更多 MCP 服务器
所属领域与标签
每个标签都能点进去看同类的全部条目。数字是当前库里的真实条数。