M
mertkayacs/reevesagents
Run many coding agents from MCP, a CLI or a web UI
在 GitHub 查看 ↗链接已于 2026-11-12 核查 · HTTP 200 · 打开的是厂商自己的官网
安装与配置
- 复制上面的命令
- 粘成
claude_desktop_config.json里mcpServers的一项（本地服务器用 command + args，示例见 客户端接法） - 重启客户端
客户端配置（取自该仓库的安装命令）
{
"mcpServers": {
"mertkayacs-reevesagents": {
"command": "npx",
"args": ["reevesagents"]
}
}
}解析自我们于 2026-11-05 抓取的该仓库 README；我们未执行过。
command/args 来自仓库写明的安装命令；不确定时请以该项目 README 为准。
VS Code（.vscode/mcp.json —— 键名是 servers）
{
"servers": {
"mertkayacs-reevesagents": {
"command": "npx",
"args": ["reevesagents"]
}
}
}VS Code 顶层键是 <code>servers</code>，其余与上面那份相同。
Claude Code（命令行）
claude mcp add --transport stdio mertkayacs-reevesagents -- npx reevesagents
Claude Code 不收 JSON 文件，用这条命令直接加。
配置项的键名以你的客户端为准：客户端与 CLI
- 来源明细
- 收录自 abordage/awesome-mcp 榜单（我们从中收集的条目之一） · 条目类型：MCP 服务
- 收录与活跃
- 收录于 2026-11-05 · 最近见到 2026-11-14 · 共见到 10 次 · 被 10 个来源列出
- 评分构成
- 综合分 1,003 · 10 个来源 · mcp
- 安装
npx reevesagents
常见问题（答案都来自我们的记录）
怎么安装？
该仓库给出的安装命令是
npx reevesagents。我们的记录里它是仓库自己提供的；不保证在你的客户端上直接可用。它适合谁 / 用来做什么？
我们把它归在这些标签下: MCP 服务。标签来自条目自身，不是我们强加的分类。
谁维护它、还在更新吗？
我们收录于 2026-11-05；最近见到 2026-11-14。这里没有"官方认证"或"质量评级"——我们只记录来源与时间。
ReevesAgents is free and open source under the Apache-2.0 license.
以下摘录自该仓库的 README（片段） · 在 GitHub 读完整 README →
Demo ·
Docs ·
FAQ ·
Issues
25+ coding CLIs, one workspace.
English · Deutsch · Français · Español · Português · Italiano · Türkçe · Русский · 简体中文 · العربية
ReevesAgents is a local workspace for AI coding CLIs. It runs Claude Code,
Codex, OpenCode, Hermes, Kimi, DeepSeek, Qwen, Pi, Aider, Gemini CLI, Cline CLI,
Crush, Goose, Kilo Code, Letta Code, Mistral Vibe, Grok Build, Kiro CLI,
Factory Droid, Qoder CLI, Warp, Junie CLI, GitHub Copilot CLI, Cursor CLI,
Rovo Dev CLI, and other provider CLIs side by side in tmux. You can use it as a
normal CLI/TUI/Web UI, or attach its opt-in MCP so one agent can spawn, read,
steer, and stop the rest.
Provider logins stay inside each provider CLI. ReevesAgents keeps its own state
as a few plain JSON files under ~/.reeves, and it runs only while you or an
attached CLI are using it.
## Quick Start
sh
pnpm add -g reevesagents
reevesagents doctor
reevesagents
Start a run from the CLI:
sh
reevesagents spawn claude-code:lead codex:tests hermes:research \
--name "release check" \
--prompt "Review the release path, test coverage, and docs."
Open the Web UI:
sh
reevesagents web
Let one attached agent drive the others:
sh
reevesagents attach codex
reevesagents hosts
Restart that CLI after attach so it loads the MCP tools.
## Windows
Native Windows 10 1809+ needs no WSL: reevesagents ships a built-in, tmux-compatible
multiplexer (winmux) that runs panes over ConPTY. Agents keep running after you close
the UI because winmux runs as a background server, just like tmux. When you attach in
the TUI or CLI, the usual prefix keys work: Ctrl-b d to detach, Ctrl-b n / p to move
between agent windows, Ctrl-b 0-9 to jump to a window.
## What It Gives You
| Surface | Use it for |
| TUI | Keyboard-first run control inside the terminal. |
| Web UI | Local visual view of runs, panes, agents, approvals, and history. |
| CLI | Scripts, smoke checks, spawning, state cleanup, and tmux jumps. |
| Agent Control MCP | One trusted CLI can spawn and drive other CLIs through local tools. |
| tmux | Real provider CLI windows that keep running after the UI closes. |
ReevesAgents is local by design. State is plain JSON under ~/.reeves, and the
CLIs it starts are the same CLIs you already use by hand.
## Tools
Four tools sit next to the coding CLIs. Perplexity CLI searches the web,
Google Colab CLI runs scripts and notebooks on CPU, GPU and TPU runtimes,
Hugging Face CLI downloads and uploads models and datasets and runs jobs on the
Hub, and Ollama runs local or cloud models from the terminal. Agents call them
from their own shell.
reevesagents tools lists the four with a purpose, an example command, and
whether each is installed and signed in (for Ollama: reachable). Add --json
for scripts. An agent with the MCP attached gets the same list from
listtools.
Install
ReevesAgents needs Node.js 22.12+, tmux 3.0+, and at least one supported
provider CLI installed and authenticated. It supports macOS, Linux, and WSL.
sh
# Homebrew
brew tap mertkayacs/reevesagents
brew install reevesagents
# pnpm
pnpm add -g reevesagents
# npm
npm install -g reevesagents
# one-shot checks
pnpm dlx reevesagents doctor
npx reevesagents doctor
Pin a version by replacing :
Docs ·
FAQ ·
Issues
25+ coding CLIs, one workspace.
English · Deutsch · Français · Español · Português · Italiano · Türkçe · Русский · 简体中文 · العربية
ReevesAgents is a local workspace for AI coding CLIs. It runs Claude Code,
Codex, OpenCode, Hermes, Kimi, DeepSeek, Qwen, Pi, Aider, Gemini CLI, Cline CLI,
Crush, Goose, Kilo Code, Letta Code, Mistral Vibe, Grok Build, Kiro CLI,
Factory Droid, Qoder CLI, Warp, Junie CLI, GitHub Copilot CLI, Cursor CLI,
Rovo Dev CLI, and other provider CLIs side by side in tmux. You can use it as a
normal CLI/TUI/Web UI, or attach its opt-in MCP so one agent can spawn, read,
steer, and stop the rest.
Provider logins stay inside each provider CLI. ReevesAgents keeps its own state
as a few plain JSON files under ~/.reeves, and it runs only while you or an
attached CLI are using it.
## Quick Start
sh
pnpm add -g reevesagents
reevesagents doctor
reevesagents
Start a run from the CLI:
sh
reevesagents spawn claude-code:lead codex:tests hermes:research \
--name "release check" \
--prompt "Review the release path, test coverage, and docs."
Open the Web UI:
sh
reevesagents web
Let one attached agent drive the others:
sh
reevesagents attach codex
reevesagents hosts
Restart that CLI after attach so it loads the MCP tools.
## Windows
Native Windows 10 1809+ needs no WSL: reevesagents ships a built-in, tmux-compatible
multiplexer (winmux) that runs panes over ConPTY. Agents keep running after you close
the UI because winmux runs as a background server, just like tmux. When you attach in
the TUI or CLI, the usual prefix keys work: Ctrl-b d to detach, Ctrl-b n / p to move
between agent windows, Ctrl-b 0-9 to jump to a window.
## What It Gives You
| Surface | Use it for |
| TUI | Keyboard-first run control inside the terminal. |
| Web UI | Local visual view of runs, panes, agents, approvals, and history. |
| CLI | Scripts, smoke checks, spawning, state cleanup, and tmux jumps. |
| Agent Control MCP | One trusted CLI can spawn and drive other CLIs through local tools. |
| tmux | Real provider CLI windows that keep running after the UI closes. |
ReevesAgents is local by design. State is plain JSON under ~/.reeves, and the
CLIs it starts are the same CLIs you already use by hand.
## Tools
Four tools sit next to the coding CLIs. Perplexity CLI searches the web,
Google Colab CLI runs scripts and notebooks on CPU, GPU and TPU runtimes,
Hugging Face CLI downloads and uploads models and datasets and runs jobs on the
Hub, and Ollama runs local or cloud models from the terminal. Agents call them
from their own shell.
reevesagents tools lists the four with a purpose, an example command, and
whether each is installed and signed in (for Ollama: reachable). Add --json
for scripts. An agent with the MCP attached gets the same list from
listtools.
Install
ReevesAgents needs Node.js 22.12+, tmux 3.0+, and at least one supported
provider CLI installed and authenticated. It supports macOS, Linux, and WSL.
sh
# Homebrew
brew tap mertkayacs/reevesagents
brew install reevesagents
# pnpm
pnpm add -g reevesagents
# npm
npm install -g reevesagents
# one-shot checks
pnpm dlx reevesagents doctor
npx reevesagents doctor
Pin a version by replacing :
收录徽章（可选）
想把收录标记放进 README 就复制这行，可选，不影响收录。
[](https://anclum.com/zh/s/mertkayacs-reevesagents/)
- 来源
- awesome · https://github.com/mertkayacs/reevesagents
- 按领域浏览
- MCP 服务
- 收录来源
- 10 个独立来源
- 收录于
- 今天
同类推荐
所属领域与标签
每个标签都能点进去看同类的全部条目。数字是当前库里的真实条数。