官方说明10 个来源MCP 服务8 天前
jasonjmcghee/claude-debugs-for-you
📇 🏠 - VS Code extension and MCP server for language-agnostic automatic debugging via breakpoints and…
在 GitHub 查看 ↗直链 · 无中转页
官方说明📇 🏠 - VS Code extension and MCP server for language-agnostic automatic debugging via breakpoints and expression evaluation.
配置模板（请按你的客户端调整）
claude mcp add claude-debugs-for-you -- npx -y claude-debugs-for-you
这是根据仓库名生成的可粘贴骨架，命令行参数与包名请以该项目 README 为准。
- ★ 数取值
- 515 ★ · jasonjmcghee/claude-debugs-for-you · 取自该仓库的 GitHub 页面 · （2026-10-16 20:00:20 核对）
- 来源明细
- 收录自 punkpeye/awesome-mcp-servers 榜单（我们从中收集的条目之一） · 条目类型：MCP 服务
- 收录与活跃
- 收录于 2026-10-09 · 最近见到 2026-10-16 · 共见到 32 次 · 被 10 个来源列出
- 评分构成
- 综合分 1,003 · 515 ★ · 10 个来源 · mcp
常见问题（答案都来自我们的记录）
怎么安装？
我们【没有】从该仓库取到安装命令（我们的 install 覆盖率只有约 4%）。请看它的 README 或 releases 页。
它适合谁 / 用来做什么？
我们把它归在这些标签下: MCP 服务。标签来自条目自身，不是我们强加的分类。
谁维护它、还在更新吗？
仓库
jasonjmcghee/claude-debugs-for-you；我们收录于 2026-10-09；最近见到 2026-10-16。这里没有"官方认证"或"质量评级"——我们只记录来源与时间。第三方质量标记
Claude Debugs For You
以下摘录自该仓库的 README（片段） · 在 GitHub 读完整 README →
_aka Vibe Debugging_
Enable Claude (or any other LLM) to interactively debug your code
This is an MCP Server and VS Code extension which enables claude to interactively debug and evaluate expressions.
That means it should also work with other models / clients etc. but I only demonstrate it with Claude Desktop and Continue here.
It's language-agnostic, assuming debugger console support and valid launch.json for debugging in VSCode.
Getting Started
1. Download the extension from releases or VS Code Marketplace
2. Install the extension
- If using .vsix directly, go to the three dots in "Extensions" in VS Code and choose "Install from VSIX..."
3. You will see a new status menu item "Claude Debugs For You" which shows if it is running properly (check) or failed to startup (x)
You can click this status menu for the commands available
Follow one of the options below, depending on your setup
If using stdio (classic, required for Claude Desktop)
4. Copy the stdio server path to your clipboard by searching vs code commands for "Copy MCP Debug Server stdio path to clipboard"
5. Paste the following (BUT UPDATE THE PATH TO THE COPIED ONE!) in your claude_desktop_config.json or edit accordingly if you use other MCP servers
6. Start Claude desktop (or other MCP client)
1. Note: You may need to restart it, if it was already running.
2. You can skip this step if using Continue/Cursor or other built-in to VS Code
If using /sse (e.g. Cursor)
4. Retrieve the MCP server sse address by using the "Copy MCP Debug Server sse address to clipboard" command
1. You can just write it out server URL of "http://localhost:4711/sse", or whatever port you setup in settings.
5. Add it wherever you need to based on your client
1. You may need to hit "refresh" depending on client: this is required in Cursor
6. Start MCP client
1. Note: You may need to restart it, if it was already running.
2. You can skip this step if using Continue/Cursor or other built-in to VS Code
You're ready to debug!
_VS Code Debugging Documentation_
Open a project containing a .vscode/launch.json with the first configuration setup to debug a specific file with ${file}.
See Run an Example below, and/or watch a demo video.
Contributing
Find bugs or have an idea that will improve this? Please open a pull request or log an issue.
Does this readme suck? Help me improve it!
Demo
Using Continue
It figures out the problem, and then suggests a fix, which we just click to apply
https://github.com/user-attachments/assets/3a0a879d-2db7-4a3f-ab43-796c22a0f1ef
How do I set this up with Continue? / Show MCP Configuration
Read the docs!
Configuration:
You'll also need to choose a model capable of using tools.
When the list of tools pops up, make sure to click "debug" in the list of your tools, and set it to be "Automatic".
### Troubleshooting
If you are seeing MCP errors in continue, try disabling / re-enabling the continue plugin
Enable Claude (or any other LLM) to interactively debug your code
This is an MCP Server and VS Code extension which enables claude to interactively debug and evaluate expressions.
That means it should also work with other models / clients etc. but I only demonstrate it with Claude Desktop and Continue here.
It's language-agnostic, assuming debugger console support and valid launch.json for debugging in VSCode.
Getting Started
1. Download the extension from releases or VS Code Marketplace
2. Install the extension
- If using .vsix directly, go to the three dots in "Extensions" in VS Code and choose "Install from VSIX..."
3. You will see a new status menu item "Claude Debugs For You" which shows if it is running properly (check) or failed to startup (x)
You can click this status menu for the commands available
Follow one of the options below, depending on your setup
If using stdio (classic, required for Claude Desktop)
4. Copy the stdio server path to your clipboard by searching vs code commands for "Copy MCP Debug Server stdio path to clipboard"
5. Paste the following (BUT UPDATE THE PATH TO THE COPIED ONE!) in your claude_desktop_config.json or edit accordingly if you use other MCP servers
6. Start Claude desktop (or other MCP client)
1. Note: You may need to restart it, if it was already running.
2. You can skip this step if using Continue/Cursor or other built-in to VS Code
If using /sse (e.g. Cursor)
4. Retrieve the MCP server sse address by using the "Copy MCP Debug Server sse address to clipboard" command
1. You can just write it out server URL of "http://localhost:4711/sse", or whatever port you setup in settings.
5. Add it wherever you need to based on your client
1. You may need to hit "refresh" depending on client: this is required in Cursor
6. Start MCP client
1. Note: You may need to restart it, if it was already running.
2. You can skip this step if using Continue/Cursor or other built-in to VS Code
You're ready to debug!
_VS Code Debugging Documentation_
Open a project containing a .vscode/launch.json with the first configuration setup to debug a specific file with ${file}.
See Run an Example below, and/or watch a demo video.
Contributing
Find bugs or have an idea that will improve this? Please open a pull request or log an issue.
Does this readme suck? Help me improve it!
Demo
Using Continue
It figures out the problem, and then suggests a fix, which we just click to apply
https://github.com/user-attachments/assets/3a0a879d-2db7-4a3f-ab43-796c22a0f1ef
How do I set this up with Continue? / Show MCP Configuration
Read the docs!
Configuration:
You'll also need to choose a model capable of using tools.
When the list of tools pops up, make sure to click "debug" in the list of your tools, and set it to be "Automatic".
### Troubleshooting
If you are seeing MCP errors in continue, try disabling / re-enabling the continue plugin
- 来源
- awesome · https://github.com/jasonjmcghee/claude-debugs-for-you
- 按领域浏览
- MCP 服务
- Traction
- 515 ★
- 收录于
- 昨天
更多MCP 服务
所属领域与标签
每个标签都能点进去看同类的全部条目。数字是当前库里的真实条数。