F
fwx/unroll
Agent skill that pulls an X/Twitter thread into Markdown to read, summarize, or save
在 GitHub 查看 ↗链接已于 2026-11-12 核查 · HTTP 200 · 打开的是厂商自己的官网
安装与配置
客户端配置（取自该仓库的安装命令）
{
"mcpServers": {
"fwx-unroll": {
"command": "npx",
"args": ["skills"]
}
}
}解析自我们于 2026-11-04 抓取的该仓库 README；我们未执行过。
command/args 来自仓库写明的安装命令；不确定时请以该项目 README 为准。
VS Code（.vscode/mcp.json —— 键名是 servers）
{
"servers": {
"fwx-unroll": {
"command": "npx",
"args": ["skills"]
}
}
}VS Code 顶层键是 <code>servers</code>，其余与上面那份相同。
Claude Code（命令行）
claude mcp add --transport stdio fwx-unroll -- npx skills
Claude Code 不收 JSON 文件，用这条命令直接加。
配置项的键名以你的客户端为准：客户端与 CLI
- ★ 数取值
- 2 ★ · fwx/unroll · 取自 GitHub 搜索 API · （2026-11-13 20:00:50 核对）
- 来源明细
- 从该仓库的 GitHub 页面直接读取 · 条目类型：开源项目
- 收录与活跃
- 收录于 2026-11-05 · 最近见到 2026-11-14 · 共见到 10 次 · 被 2 个来源列出
- 评分构成
- 综合分 203 · 2 ★ · 2 个来源 · repo
- 安装
npx skills
常见问题（答案都来自我们的记录）
怎么安装？
该仓库给出的安装命令是
npx skills。我们的记录里它是仓库自己提供的；不保证在你的客户端上直接可用。它适合谁 / 用来做什么？
我们把它归在这些标签下: 开源项目。标签来自条目自身，不是我们强加的分类。
谁维护它、还在更新吗？
仓库
fwx/unroll；我们收录于 2026-11-05；最近见到 2026-11-14。这里没有"官方认证"或"质量评级"——我们只记录来源与时间。# unroll
以下摘录自该仓库的 README（片段） · 在 GitHub 读完整 README →
Unroll a Twitter/X thread to Markdown, right from your AI agent.
English | Русский
An agent skill that pulls an X/Twitter thread into clean Markdown, so your agent can read it, summarize it, or save it to a file. That covers a classic thread (a post plus the author's replies under it) and a reply chain where the author talks to other people.
It uses the open Agent Skills format. Tested in Claude Code, oh-my-pi, and Codex. Other agents that read SKILL.md should work too, see Other agents.
It pulls data from the public FxTwitter API, so you don't need an X account, an API key, or a headless browser.
## Install in Claude Code
/plugin marketplace add fwx/unroll
/plugin install unroll@unroll
Or copy skills/unroll to ~/.claude/skills/unroll by hand.
## Use
Give your agent a link and ask in your own words. No magic phrase needed:
> read this thread and tell me what it's about https://x.com/user/status/123
> save this thread https://x.com/user/status/123
If you ask to read, summarize, or translate, the agent gets the thread as text and no file is created. If you ask to save, it writes - .md.
Or call the skill directly:
/unroll:unroll https://x.com/user/status/123 # Claude Code
/skill:unroll https://x.com/user/status/123 # oh-my-pi
$unroll https://x.com/user/status/123 # Codex
Any tweet from the thread works: the first one, the last one, or one in the middle.
The script runs fine without any agent too. It needs Python 3.8+ and nothing else, only the standard library:
bash
python3 skills/unroll/scripts/unroll.py https://x.com/user/status/123 -o thread.md
python3 skills/unroll/scripts/unroll.py https://x.com/user/status/123 -o - # print to stdout
## Other agents
The quickest way is the skills CLI. It asks which agents to install to (Codex, Cursor, omp and others):
bash
npx skills add fwx/unroll
Or do it by hand: clone the repo and link (or copy) skills/unroll into the agent's skills directory:
bash
git clone https://github.com/fwx/unroll.git
ln -s "$PWD/unroll/skills/unroll" ~/.omp/agent/skills/unroll # oh-my-pi
ln -s "$PWD/unroll/skills/unroll" ~/.codex/skills/unroll # Codex
For a single project, use .omp/skills/ or .agents/skills/ inside the repo instead. Checked with omp 18.12 and Codex 0.153.
Codex's sandbox has no network by default, so the script can't reach api.fxtwitter.com there. If it fails with a network error, add this to ~/.codex/config.toml:
toml
[sandboxworkspacewrite]
networkaccess = true
## Output
A real run on a reply by Sam Altman, cut after five tweets. The link points deep into the replies, so the file starts at the original post and walks down to it:
bash
python3 skills/unroll/scripts/unroll.py https://x.com/sama/status/2117845542021808438
markdown
author: "@sama"
name: "Sam Altman"
date: 2026-11-04
source: https://x.com/sama/status/2117794005165748448
tweets: 6
participants: ["@sama", "@HarshithLucky3", "@jestermolecule"]
English | Русский
An agent skill that pulls an X/Twitter thread into clean Markdown, so your agent can read it, summarize it, or save it to a file. That covers a classic thread (a post plus the author's replies under it) and a reply chain where the author talks to other people.
It uses the open Agent Skills format. Tested in Claude Code, oh-my-pi, and Codex. Other agents that read SKILL.md should work too, see Other agents.
It pulls data from the public FxTwitter API, so you don't need an X account, an API key, or a headless browser.
## Install in Claude Code
/plugin marketplace add fwx/unroll
/plugin install unroll@unroll
Or copy skills/unroll to ~/.claude/skills/unroll by hand.
## Use
Give your agent a link and ask in your own words. No magic phrase needed:
> read this thread and tell me what it's about https://x.com/user/status/123
> save this thread https://x.com/user/status/123
If you ask to read, summarize, or translate, the agent gets the thread as text and no file is created. If you ask to save, it writes - .md.
Or call the skill directly:
/unroll:unroll https://x.com/user/status/123 # Claude Code
/skill:unroll https://x.com/user/status/123 # oh-my-pi
$unroll https://x.com/user/status/123 # Codex
Any tweet from the thread works: the first one, the last one, or one in the middle.
The script runs fine without any agent too. It needs Python 3.8+ and nothing else, only the standard library:
bash
python3 skills/unroll/scripts/unroll.py https://x.com/user/status/123 -o thread.md
python3 skills/unroll/scripts/unroll.py https://x.com/user/status/123 -o - # print to stdout
## Other agents
The quickest way is the skills CLI. It asks which agents to install to (Codex, Cursor, omp and others):
bash
npx skills add fwx/unroll
Or do it by hand: clone the repo and link (or copy) skills/unroll into the agent's skills directory:
bash
git clone https://github.com/fwx/unroll.git
ln -s "$PWD/unroll/skills/unroll" ~/.omp/agent/skills/unroll # oh-my-pi
ln -s "$PWD/unroll/skills/unroll" ~/.codex/skills/unroll # Codex
For a single project, use .omp/skills/ or .agents/skills/ inside the repo instead. Checked with omp 18.12 and Codex 0.153.
Codex's sandbox has no network by default, so the script can't reach api.fxtwitter.com there. If it fails with a network error, add this to ~/.codex/config.toml:
toml
[sandboxworkspacewrite]
networkaccess = true
## Output
A real run on a reply by Sam Altman, cut after five tweets. The link points deep into the replies, so the file starts at the original post and walks down to it:
bash
python3 skills/unroll/scripts/unroll.py https://x.com/sama/status/2117845542021808438
markdown
author: "@sama"
name: "Sam Altman"
date: 2026-11-04
source: https://x.com/sama/status/2117794005165748448
tweets: 6
participants: ["@sama", "@HarshithLucky3", "@jestermolecule"]
收录徽章（可选）
想把收录标记放进 README 就复制这行，可选，不影响收录。
[](https://anclum.com/zh/s/fwx-unroll/)
- 来源
- github · https://github.com/fwx/unroll
- 按领域浏览
- 开源项目
- Traction
- 2 ★
- 收录来源
- 2 个独立来源
- 收录于
- 今天
同类推荐
所属领域与标签
每个标签都能点进去看同类的全部条目。数字是当前库里的真实条数。