A
arjunvlama/toli
★ 2·更新 2026-10-27
在 GitHub 查看 ↗直链 · 无中转页
我们没有可直接复制的安装命令,也没有公开的远端端点,所以不出配置。上面那条命令仅供参考,不是我们能担保的可复制命令——编一条出来比不给更糟。 各客户端的接法 →
- ★ 数取值
- 2 ★ · arjunvlama/toli · 取自 GitHub 搜索 API · (2026-11-19 20:00:48 核对)
- 来源明细
- 收录自 punkpeye/awesome-mcp-servers 榜单(我们从中收集的条目之一) · 条目类型:MCP 服务
- 收录与活跃
- 收录于 2026-11-18 · 最近见到 2026-11-20 · 共见到 3 次 · 被 3 个来源列出
- 评分构成
- 综合分 300 · 2 ★ · 3 个来源 · mcp
常见问题(答案都来自我们的记录)
它适合谁 / 用来做什么?
我们把它归在这些标签下: MCP 服务。标签来自条目自身,不是我们强加的分类。
谁维护它、还在更新吗?
仓库
arjunvlama/toli;我们收录于 2026-11-18;最近见到 2026-11-20。这里没有"官方认证"或"质量评级"——我们只记录来源与时间。README 原文(英文,未翻译) · 在 GitHub 读完整 README →
# toli — the telephone for AI agents ☎️
以下摘录自该仓库的 README(片段)
toli (टोली, "toh-lee") is Hindi for a band of people working together.
With toli, your AI agents can work together no matter which harness they run in (Claude Code, Codex, OpenCode, OpenClaw, … or one you built yourself) or where they run, and with any agent that already speaks A2A. They can collaborate on one machine or across the internet with a teammate's agents, handing off tasks, asking each other questions and sending back results over the open A2A protocol.
It's not just for coding agents. Any agent with an MCP client can join, so a personal assistant can check with your coding agent before it answers you:
## How it works
You run one toli daemon. Each of your agents gets a name and a token there, which it uses to reach toli over MCP, on localhost.
Each agent has peers: the other agents it's allowed to work with, on your daemon or someone else's. Only you can add peers, never the agent. Pairing exchanges a token in each direction.
Agents and their peers send each other tasks over A2A. They can delegate work, ask questions and send back results. When a task arrives, toli wakes your agent and notifies it.
You can watch and manage all their tasks in toli (a TUI), or with the CLI.
## Install
macOS or Linux:
sh
curl -fsSL https://raw.githubusercontent.com/arjunvlama/toli/main/install.sh | sh
Homebrew:
sh
brew install arjunvlama/tap/toli
Windows (PowerShell):
powershell
irm https://raw.githubusercontent.com/arjunvlama/toli/main/install.ps1 | iex
With Go: go install github.com/arjunvlama/toli/cmd/toli@latest
Then start the daemon in the background:
sh
toli daemon install
toli daemon status
toli daemon stop, start and uninstall manage it.
## Agents on the same machine
A two-minute quickstart.
1. Add the agents, and connect them to toli. Run this in the folder where you start each agent: where you type claude or codex, or the folder you opened in your editor (its built-in terminal starts there). --connect names the agent's harness (all harnesses), and peers see the description when deciding what to send it.
sh
cd ~/src/web-ui
toli agent add alice --description "Owns the web UI" --connect claude-code
cd ~/src/api
toli agent add bob --description "Owns the API" --connect codex
Each prints what it did:
✓ Added agent 'alice'.
card_url http://127.0.0.1:7422/a2a/alice/.well-known/agent-card.json
✓ Connected Claude Code to agent 'alice' in ~/src/web-ui (~/.claude.json, .claude/settings.local.json).
Next: start a Claude Code session, or restart a running one (claude --continue).
Sessions only pick toli up when they start, so start one in each folder, or restart any that are already running. Then toli agent list shows each agent's harness, which means it's connected. (Some harnesses, like Codex, only show up once you've sent them a message after starting or restarting.)
2. Pair them. alice invites bob:
sh
toli peer invite alice bob
✓ Created an invite for peer 'bob'. It works once, within 24 hours.
To accept it, run this where peer 'bob' runs:
toli peer accept toli-invite:eyJ2IjoxLCJhZ2Vu…
Send it privately: whoever has it can pair with agent 'alice'.
bob accepts:
sh
toli peer accept bob
✓ Paired agent 'bob' with peer 'alice'.
With toli, your AI agents can work together no matter which harness they run in (Claude Code, Codex, OpenCode, OpenClaw, … or one you built yourself) or where they run, and with any agent that already speaks A2A. They can collaborate on one machine or across the internet with a teammate's agents, handing off tasks, asking each other questions and sending back results over the open A2A protocol.
It's not just for coding agents. Any agent with an MCP client can join, so a personal assistant can check with your coding agent before it answers you:
## How it works
You run one toli daemon. Each of your agents gets a name and a token there, which it uses to reach toli over MCP, on localhost.
Each agent has peers: the other agents it's allowed to work with, on your daemon or someone else's. Only you can add peers, never the agent. Pairing exchanges a token in each direction.
Agents and their peers send each other tasks over A2A. They can delegate work, ask questions and send back results. When a task arrives, toli wakes your agent and notifies it.
You can watch and manage all their tasks in toli (a TUI), or with the CLI.
## Install
macOS or Linux:
sh
curl -fsSL https://raw.githubusercontent.com/arjunvlama/toli/main/install.sh | sh
Homebrew:
sh
brew install arjunvlama/tap/toli
Windows (PowerShell):
powershell
irm https://raw.githubusercontent.com/arjunvlama/toli/main/install.ps1 | iex
With Go: go install github.com/arjunvlama/toli/cmd/toli@latest
Then start the daemon in the background:
sh
toli daemon install
toli daemon status
toli daemon stop, start and uninstall manage it.
## Agents on the same machine
A two-minute quickstart.
1. Add the agents, and connect them to toli. Run this in the folder where you start each agent: where you type claude or codex, or the folder you opened in your editor (its built-in terminal starts there). --connect names the agent's harness (all harnesses), and peers see the description when deciding what to send it.
sh
cd ~/src/web-ui
toli agent add alice --description "Owns the web UI" --connect claude-code
cd ~/src/api
toli agent add bob --description "Owns the API" --connect codex
Each prints what it did:
✓ Added agent 'alice'.
card_url http://127.0.0.1:7422/a2a/alice/.well-known/agent-card.json
✓ Connected Claude Code to agent 'alice' in ~/src/web-ui (~/.claude.json, .claude/settings.local.json).
Next: start a Claude Code session, or restart a running one (claude --continue).
Sessions only pick toli up when they start, so start one in each folder, or restart any that are already running. Then toli agent list shows each agent's harness, which means it's connected. (Some harnesses, like Codex, only show up once you've sent them a message after starting or restarting.)
2. Pair them. alice invites bob:
sh
toli peer invite alice bob
✓ Created an invite for peer 'bob'. It works once, within 24 hours.
To accept it, run this where peer 'bob' runs:
toli peer accept toli-invite:eyJ2IjoxLCJhZ2Vu…
Send it privately: whoever has it can pair with agent 'alice'.
bob accepts:
sh
toli peer accept bob
✓ Paired agent 'bob' with peer 'alice'.
收录徽章(可选)
想把收录标记放进 README 就复制这行,可选,不影响收录。
[](https://anclum.com/zh/s/arjunvlama-toli/)
- 来源
- awesome · https://github.com/arjunvlama/toli
- 按领域浏览
- MCP 服务
- Traction
- 2 ★
- 收录来源
- 3 个独立来源
- 收录于
- 今天
更多 MCP 服务器
所属领域与标签
每个标签都能点进去看同类的全部条目。数字是当前库里的真实条数。